Digital flow in dentistry and basic exocad program
For dentists and technicians who wish to work in the digital flow write now, without investing in equipments
What you'll learn
Digital flow in dentistry and basic exocad program
Description
* Attention: video classes in Portuguese, subtitled in English *.
* Manuals in English*.
This course will allow dentists, protestists, technicians, university students and/or other rehabilitating professionals to perform the transition from analogue flow to digital flow , knowing the digital flow detailed, making the professional understand / execute the concepts: analogue x digital flow; introduction to 3D waxing for aesthetic rehabilitations, unit on teeth, cadcam, stl files, opening service orders, delimiting, positioning and modeling, sending files for milling / printing.
This course was created through years of studying, clinical and laboratory practice, in addition to the implementation and improvement of digital flow in several clinics and laboratories through standardization of clinical and laboratory operational procedures of digital flow, from planning in dental clinic, through 3D scanning, 3D printing and milling; until the prosthetic elements installation .
At the end of the course, the students will understand and be able to start working in the digital flow (dentists), and to perform and manage cad work (drawing - exocad program) on prepared teeth (technicians and dentists)
- copings;
- anatomical crowns;
- provisional crowns.
*over 3 hours of original video classes
*individualized follow-up before and after the course in order to ensure your safe transition to digital flow or digital flow improvement.
Coordinator and teacher: Fernando Melo. Dental surgeon UFG (Universidade Federal de Goiás - Brazil); Bucomaxillofacial Radiologist and Imaginologist ABO (Associação Brasileira de Odontologia) - Goiás - Brazil; Cadista, Official Criminal ExpertPCMG (Policia Civil de Minas Gerais) - Brazil; post graduate in Expertise and Environmental Audit; worked as title monitor of Bucomaxillofacial Surgery and Traumatology - UFG (Universidade Federal de Goiás) - Brazil, worked as internship supervisor at SESC (Serviço Social do Comércio) - Goiás - Brazil - Odontosesc project (graduating students from UFG (Universidade Federal de Goiás); book's author "State 171"; worked as director of marketing and merchandising of regional distributors of success brands as Del Valle juices, Pepsico, Pedigree, among others; worked as health analyst at AGSEP (Agência Goiana do Sistema de Execução Penal) - Goiás - Brazil/ SAPEJUS (Secretaria de Administração Penitenciária e Justiça) - Goiás - Brazil; author and produce: digital flow in dentistry course with emphasis in exocad; cadcam specialty: surgical guides for implants (Exocad, Exoplan, Codiagnostix, Implant Studio Programs).
Teacher: Artur Moreira. Dental prosthesis technician. 14 years experience in prosthetic rehabilitations in analogic flow; 10 years experience in prosthetic rehabilitations in digital flow; domain of all solutions in dentistry, in both flows; mastery of available drawing programs (Exocad, Modelier, Ceramill, Dental System, among others), and last generation milling machines and 3D printers. cadcam specialty: aesthetic and functional rehabilitations.
last updated 03/2022
Genre: eLearning | MP4 | Video: h264, 1280x720 | Audio: AAC, 48.0 KHz
Language: English | Size: 3.8 GB | Duration: 9 lectures • 4h 3m
Download
http://s19.alxa.net/one/2024/03/Dig...ad.program.rar
For dentists and technicians who wish to work in the digital flow write now, without investing in equipments
What you'll learn
Digital flow in dentistry and basic exocad program
Description
* Attention: video classes in Portuguese, subtitled in English *.
* Manuals in English*.
This course will allow dentists, protestists, technicians, university students and/or other rehabilitating professionals to perform the transition from analogue flow to digital flow , knowing the digital flow detailed, making the professional understand / execute the concepts: analogue x digital flow; introduction to 3D waxing for aesthetic rehabilitations, unit on teeth, cadcam, stl files, opening service orders, delimiting, positioning and modeling, sending files for milling / printing.
This course was created through years of studying, clinical and laboratory practice, in addition to the implementation and improvement of digital flow in several clinics and laboratories through standardization of clinical and laboratory operational procedures of digital flow, from planning in dental clinic, through 3D scanning, 3D printing and milling; until the prosthetic elements installation .
At the end of the course, the students will understand and be able to start working in the digital flow (dentists), and to perform and manage cad work (drawing - exocad program) on prepared teeth (technicians and dentists)
- copings;
- anatomical crowns;
- provisional crowns.
*over 3 hours of original video classes
*individualized follow-up before and after the course in order to ensure your safe transition to digital flow or digital flow improvement.
Coordinator and teacher: Fernando Melo. Dental surgeon UFG (Universidade Federal de Goiás - Brazil); Bucomaxillofacial Radiologist and Imaginologist ABO (Associação Brasileira de Odontologia) - Goiás - Brazil; Cadista, Official Criminal ExpertPCMG (Policia Civil de Minas Gerais) - Brazil; post graduate in Expertise and Environmental Audit; worked as title monitor of Bucomaxillofacial Surgery and Traumatology - UFG (Universidade Federal de Goiás) - Brazil, worked as internship supervisor at SESC (Serviço Social do Comércio) - Goiás - Brazil - Odontosesc project (graduating students from UFG (Universidade Federal de Goiás); book's author "State 171"; worked as director of marketing and merchandising of regional distributors of success brands as Del Valle juices, Pepsico, Pedigree, among others; worked as health analyst at AGSEP (Agência Goiana do Sistema de Execução Penal) - Goiás - Brazil/ SAPEJUS (Secretaria de Administração Penitenciária e Justiça) - Goiás - Brazil; author and produce: digital flow in dentistry course with emphasis in exocad; cadcam specialty: surgical guides for implants (Exocad, Exoplan, Codiagnostix, Implant Studio Programs).
Teacher: Artur Moreira. Dental prosthesis technician. 14 years experience in prosthetic rehabilitations in analogic flow; 10 years experience in prosthetic rehabilitations in digital flow; domain of all solutions in dentistry, in both flows; mastery of available drawing programs (Exocad, Modelier, Ceramill, Dental System, among others), and last generation milling machines and 3D printers. cadcam specialty: aesthetic and functional rehabilitations.
last updated 03/2022
Genre: eLearning | MP4 | Video: h264, 1280x720 | Audio: AAC, 48.0 KHz
Language: English | Size: 3.8 GB | Duration: 9 lectures • 4h 3m
Download
http://s19.alxa.net/one/2024/03/Dig...ad.program.rar
