Bridge Specialization - Revit + Robot & OpenBridge
Learn to design Bridge systems using AutoDesk Revit and Robot and too Bentley OpenBridge and Lummen
What you'll learn:
Bridges Design
Design Structures
Bentley Open Bridge Design
Lumen RT
BIM
Robot Structural Design
Revit used to Bridge design
Requirements:
Civil Engineering knowledge
To complete the practices, the student will need to use the software Revit, Robot and OpenBridge
Description:
With this course, you will learn how to take advantage of these tools so that the process of designing structures for bridges is faster, more efficient, and of higher quality.
LEVEL I CONTENT
Level 1 of Bentley Open Bridge is a beginner’s guide, where we learn the basics of this software. Starting with a short theoretical session, we assume that you have basic know-how about bridges, after a quick review of some common terms we will get familiar with the interface of Bentley Open Bridge. #After a brief introduction, we will proceed with an exercise in which we will create Precast Girder 2 Span Straight Bridge Model. In the process of making this bridge we will learn multiple procedure like adding a bridge Model, support Lines, bridge Decks, Girders, placing, and Modifying Piers, Abutments, Bearings, and Barriers.
LEVEL I - DESIGN BRIDGES USING OPEN BRIDGES + LumenRT
Lecture 1: Theory
LEVEL I - GETTING STARTED
Lecture 2: Introduction
Lecture 3: Initiating Open Bridge Modler from Open Bridge Designer
Lecture 4: User Interface
Lecture 5: Importing .tin file (Terrain Model)
LEVEL I - PRECAST GIRDER 2 SPAN STRAIGHT BRIDGE MODEL
Lecture 6: Adding a bridge Model
Lecture 7: Adding Support Lines
Lecture 8: Adding Bridges Decks
Lecture 9: Adding Girders
Lecture 10: Placing and Modifying Pier
Lecture 11: Placing Abutments
Lecture 12: Placing Bearings and Stepped Cap
Lecture 13: Placing Barriers
LEVEL I - PRECAST BEAM 2 SPAN STRAIGHT BRIDGE MODEL - USING WIZARD
Lecture 14: Adding Bridge Model
Lecture 15: Place Excavation
Lecture 16: Place Diaphragms
LEVEL I - Lumen RT - Lessons asked by students
Lecture 17: Lumen RT
LEVEL II CONTENT
Level 2 of Bentley Open Bridge is an intermediate-level guide, where we move one step ahead of the basics of this software.
Starting with a short theoretical session, we assume that you have basic know-how about bridges, after a quick review of some common terms we will get familiar with the interface of Bentley Open Bridge.After a brief introduction, we will proceed with an exercise in which we will create the Steel Girder 2 Span Straight Bridge Model. In process of making this bridge, we will learn multiple procedures like adding a bridge Model, support Lines, bridge Decks, Girders, placing and Modifying Piers, Abutments, Bearings, and Barriers. #...
After the successful creation of the Steel Girder 2 Span Straight Bridge Model using a conventional method, we will learn how to make the same using Wizard method which is way more convenient and gets results with just a few clicks and inputs. Furthermore, we will look into field splices. After that, you can compare both models at your convenience.
After learning these two techniques for the creation of Steel Girder 2 Span Straight Bridge Model, we will learn how to create a curved bridge with custom-built templates of deck and pier which lead to our final exercise in which we will learn how to create a Segmental Bridge Model.
After completion of these exercises, we will learn how to create our custom templates and save them in the library for future usage.
Reporting is an important part once we are done with the bridge model so we will learn several tips, tricks, and techniques to export different types of reports.
At the end of the session, you can review the theoretical part where you can learn more about the features introduced in the latest updates.
LEVEL II - DESIGN BRIDGES USING OPEN BRIDGE - LEVEL 2 - INTERMEDIATE
Lecture 18: Exercise Basic DesignLecture 19: Exercise Adding Girders
Lecture 20: Exercise Adding Cross Frames
Lecture 21: Placing Sheer Studs
Lecture 22: Exercise: Placing Pier and Abutments
Lecture 23: Exercise: Placing Bearings, Stepped Cap and Barriers 1
LEVEL II -EXERCISE: STEEL GIRDER 2 SPAN STRAIGHT BRIDGE MODEL - USING WIZARD
Lecture 24: Adding Bridge Model using Wizard
Lecture 25: Adding Sheer Studs using Wizard
Lecture 26: Creating and adding Field Splices Template using Wizard
LEVEL II - EDITING TEMPLATES FOR STEEL GIRDER CURVED BRIDGE - USING WIZARD
Lecture 27: Slanted / Curved Deck Template
Lecture 28: Custom Hammer Head Pier Template
Lecture 29: Creating Curved Bridge Using Custom Templates
LEVEL II - EXERCISE: SEGMENTAL BRIDGE MODEL
Lecture 30: Adding Bridge Model
Lecture 31: Placing Segments
Lecture 32: Reports and Constraints Tool
Lecture 33: Modeling Piers, Abutments and Barriers
LEVEL II - CUSTOM TEMPLATES
Lecture 34: Deck Template
Lecture 35: Barrier Template
Lecture 36: Pier Template
Lecture 37: Material Template
LEVEL II - REPORTING
Lecture 38: Quantity Report
Lecture 39: Input Report
Lecture 40: Deck Elevation Report
Lecture 41: Bearing Seat Report
Lecture 42: Pier Drawing
Lecture 43: Section Drawing
LEVEL II - ADDITIONAL NOTES
Lecture 44: Enhancements in latest versions
LEVEL III CONTENTIn this level, you will learn a new way to manage your bridge projects using AutoDesk Revit and Robot Structure.
Revit software is the world leader in building design using BIM (Building Information Modeling), allowing professionals not only to generate plans but to coordinate the entire building model including design features. Revit is designed to include design tools for bridge structures.When you assign elements to a project, you can:Automatically generate top plans, elevations, sections, and final impressions Perform static calculations in the cloud Perform advanced calculations in specialized programs such as Robot Structural Analysis Create structural and analytical models Quickly create and document detailed plans Improve your performance when working on a BIM model.
LEVEL III - STRUCTURE BRIDGES DESIGN - USING REVIT & ROBOT
Lecture 45: Introduction
Lecture 46: REVIT Introduction
LEVEL III - MODELING AND ANALYSIS
Lecture 47: Simple beam bridge modeling
Lecture 48: Load cases - Aanlytical model - Exporting to Robot
Lecture 49: Modeling skew simple bridge of varying sections
LEVEL III - FINAL RESULTS
Lecture 50: Interior RFT- BOQ and final layout
LEVEL III - TRUSS BRIDGE DESIGN AND MODELING
Lecture 51: Introduction
Lecture 52: Revit modeling - Truss System
Lecture 53: Robot AnalysisCourse OrientationWe will follow the logical order in which you would develop a personal project.
Instead of considering each theoretical aspect of the program, we will focus on following the workflow that best suits a real case and give you some tips to achieve the best results.You will get prepared files that will allow you to follow the progress of the course from where you consider it most necessary by guiding you to use the tools yourself while watching the classes.
The course content is updated regularly to include important updates or points that can help you improve your learning and you will have access to them in real time so you can improve your continuous skills.
Who this course is for:
Civil Engineers
BIM Modelers
Microstation and AutoCAD users
Civil 3D users
Revit users
Published 3/2024
Created by Golgi Alvarez
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 53 Lectures ( 6h 50m ) | Size: 3.76 GB
Download
*
Learn to design Bridge systems using AutoDesk Revit and Robot and too Bentley OpenBridge and Lummen
What you'll learn:
Bridges Design
Design Structures
Bentley Open Bridge Design
Lumen RT
BIM
Robot Structural Design
Revit used to Bridge design
Requirements:
Civil Engineering knowledge
To complete the practices, the student will need to use the software Revit, Robot and OpenBridge
Description:
With this course, you will learn how to take advantage of these tools so that the process of designing structures for bridges is faster, more efficient, and of higher quality.
LEVEL I CONTENT
Level 1 of Bentley Open Bridge is a beginner’s guide, where we learn the basics of this software. Starting with a short theoretical session, we assume that you have basic know-how about bridges, after a quick review of some common terms we will get familiar with the interface of Bentley Open Bridge. #After a brief introduction, we will proceed with an exercise in which we will create Precast Girder 2 Span Straight Bridge Model. In the process of making this bridge we will learn multiple procedure like adding a bridge Model, support Lines, bridge Decks, Girders, placing, and Modifying Piers, Abutments, Bearings, and Barriers.
LEVEL I - DESIGN BRIDGES USING OPEN BRIDGES + LumenRT
Lecture 1: Theory
LEVEL I - GETTING STARTED
Lecture 2: Introduction
Lecture 3: Initiating Open Bridge Modler from Open Bridge Designer
Lecture 4: User Interface
Lecture 5: Importing .tin file (Terrain Model)
LEVEL I - PRECAST GIRDER 2 SPAN STRAIGHT BRIDGE MODEL
Lecture 6: Adding a bridge Model
Lecture 7: Adding Support Lines
Lecture 8: Adding Bridges Decks
Lecture 9: Adding Girders
Lecture 10: Placing and Modifying Pier
Lecture 11: Placing Abutments
Lecture 12: Placing Bearings and Stepped Cap
Lecture 13: Placing Barriers
LEVEL I - PRECAST BEAM 2 SPAN STRAIGHT BRIDGE MODEL - USING WIZARD
Lecture 14: Adding Bridge Model
Lecture 15: Place Excavation
Lecture 16: Place Diaphragms
LEVEL I - Lumen RT - Lessons asked by students
Lecture 17: Lumen RT
LEVEL II CONTENT
Level 2 of Bentley Open Bridge is an intermediate-level guide, where we move one step ahead of the basics of this software.
Starting with a short theoretical session, we assume that you have basic know-how about bridges, after a quick review of some common terms we will get familiar with the interface of Bentley Open Bridge.After a brief introduction, we will proceed with an exercise in which we will create the Steel Girder 2 Span Straight Bridge Model. In process of making this bridge, we will learn multiple procedures like adding a bridge Model, support Lines, bridge Decks, Girders, placing and Modifying Piers, Abutments, Bearings, and Barriers. #...
After the successful creation of the Steel Girder 2 Span Straight Bridge Model using a conventional method, we will learn how to make the same using Wizard method which is way more convenient and gets results with just a few clicks and inputs. Furthermore, we will look into field splices. After that, you can compare both models at your convenience.
After learning these two techniques for the creation of Steel Girder 2 Span Straight Bridge Model, we will learn how to create a curved bridge with custom-built templates of deck and pier which lead to our final exercise in which we will learn how to create a Segmental Bridge Model.
After completion of these exercises, we will learn how to create our custom templates and save them in the library for future usage.
Reporting is an important part once we are done with the bridge model so we will learn several tips, tricks, and techniques to export different types of reports.
At the end of the session, you can review the theoretical part where you can learn more about the features introduced in the latest updates.
LEVEL II - DESIGN BRIDGES USING OPEN BRIDGE - LEVEL 2 - INTERMEDIATE
Lecture 18: Exercise Basic DesignLecture 19: Exercise Adding Girders
Lecture 20: Exercise Adding Cross Frames
Lecture 21: Placing Sheer Studs
Lecture 22: Exercise: Placing Pier and Abutments
Lecture 23: Exercise: Placing Bearings, Stepped Cap and Barriers 1
LEVEL II -EXERCISE: STEEL GIRDER 2 SPAN STRAIGHT BRIDGE MODEL - USING WIZARD
Lecture 24: Adding Bridge Model using Wizard
Lecture 25: Adding Sheer Studs using Wizard
Lecture 26: Creating and adding Field Splices Template using Wizard
LEVEL II - EDITING TEMPLATES FOR STEEL GIRDER CURVED BRIDGE - USING WIZARD
Lecture 27: Slanted / Curved Deck Template
Lecture 28: Custom Hammer Head Pier Template
Lecture 29: Creating Curved Bridge Using Custom Templates
LEVEL II - EXERCISE: SEGMENTAL BRIDGE MODEL
Lecture 30: Adding Bridge Model
Lecture 31: Placing Segments
Lecture 32: Reports and Constraints Tool
Lecture 33: Modeling Piers, Abutments and Barriers
LEVEL II - CUSTOM TEMPLATES
Lecture 34: Deck Template
Lecture 35: Barrier Template
Lecture 36: Pier Template
Lecture 37: Material Template
LEVEL II - REPORTING
Lecture 38: Quantity Report
Lecture 39: Input Report
Lecture 40: Deck Elevation Report
Lecture 41: Bearing Seat Report
Lecture 42: Pier Drawing
Lecture 43: Section Drawing
LEVEL II - ADDITIONAL NOTES
Lecture 44: Enhancements in latest versions
LEVEL III CONTENTIn this level, you will learn a new way to manage your bridge projects using AutoDesk Revit and Robot Structure.
Revit software is the world leader in building design using BIM (Building Information Modeling), allowing professionals not only to generate plans but to coordinate the entire building model including design features. Revit is designed to include design tools for bridge structures.When you assign elements to a project, you can:Automatically generate top plans, elevations, sections, and final impressions Perform static calculations in the cloud Perform advanced calculations in specialized programs such as Robot Structural Analysis Create structural and analytical models Quickly create and document detailed plans Improve your performance when working on a BIM model.
LEVEL III - STRUCTURE BRIDGES DESIGN - USING REVIT & ROBOT
Lecture 45: Introduction
Lecture 46: REVIT Introduction
LEVEL III - MODELING AND ANALYSIS
Lecture 47: Simple beam bridge modeling
Lecture 48: Load cases - Aanlytical model - Exporting to Robot
Lecture 49: Modeling skew simple bridge of varying sections
LEVEL III - FINAL RESULTS
Lecture 50: Interior RFT- BOQ and final layout
LEVEL III - TRUSS BRIDGE DESIGN AND MODELING
Lecture 51: Introduction
Lecture 52: Revit modeling - Truss System
Lecture 53: Robot AnalysisCourse OrientationWe will follow the logical order in which you would develop a personal project.
Instead of considering each theoretical aspect of the program, we will focus on following the workflow that best suits a real case and give you some tips to achieve the best results.You will get prepared files that will allow you to follow the progress of the course from where you consider it most necessary by guiding you to use the tools yourself while watching the classes.
The course content is updated regularly to include important updates or points that can help you improve your learning and you will have access to them in real time so you can improve your continuous skills.
Who this course is for:
Civil Engineers
BIM Modelers
Microstation and AutoCAD users
Civil 3D users
Revit users
Published 3/2024
Created by Golgi Alvarez
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 53 Lectures ( 6h 50m ) | Size: 3.76 GB
Download
*