Someone upload Gravostyle 7 setup file?

Hi, was bedeutet bei Euch "PC im Testmodus"?
Im Abgesicherten Modus?
Ist dies eine portable Version weil keine Installationsdatei von Gravostyle dabei ist?

Viele Grüße

I installed Gravostyle 6 and the crack on Windows XP. Unfortunately, when I open it, it says "Enter serial number."

Dear friends, I'd like to contribute to this old post with a solution for troubles when installing the software and the dongle emulator. I tried this with Windows 10 Home and Windows 11.

First thing to do is to CHECK and eventually DISABLE SECURE BOOT in PC BIOS or the dongle emulator will not install. To check it, enter in BIOS (start the PC pressing ESC, DEL, F2 or the key for your PC) and search for security options, and disable secure boot and restart Windows.

- Extract files from RAR file into any folder
- Install GS6 running the setup AS ADMINISTRATOR
- It will terminate and Windows will ask to execute it with compatibility options, do it
- Install GS6 leaving all fields empty
- If required, INSTALL NET FRAMEWORK (remember to have an internet connection to download files)
- If the software don't download NET framework, install later and continue installation (more instructions later)
- Copy 4 files from Cracked/Replace to C:\Gravostyle6000\Exe
- Go in the folder Cracked/Aladdinhl/Emul64 and RUN AS ADMINISTRATOR _prereqset64v3.cmd
- Check that install is OK
- Reboot the PC, Windows will reboot now in TEST MODE (you may check it in the lower-right corner of the desktop screen). If the pc is not in TEST MODE, following steps will not run so check!
- Go in the folder Cracked/Aladdinhl/Emul64 and RUN AS ADMINISTRATOR _install.cmd
- A tiny alert will appear, select "Install the software for the driver" and this will install the dongle driver, you will hear the sound of USB peripheral insert
- If you want, check in your DEVICE MANAGER - USB CONTROLLER if there is ALADDIN HASP peripheral installed, without this driver the software will not run
- CHECK THIS OUT: if .NET framework was not installed, install it NOW. Go to Control Panel - Activate windows functionality - search for .NET FRAMEWORK 3.5 and install it (requires some time to download and install files)
- REBOOT THE PC OTHERWISE THE GS6 will not run

... and good fun with GS6

Note: if you try to disable test mode, the dongle emulator will not run and GS6 will not run. If you need to disable it for security reasons, you could open the command line IN ADMINISTRATOR MODE and digit BCDEDIT -set TESTSIGNING OFF and if you want to re-enable it re-open command line in administrator mode and digit BCDEDIT -set TESTSIGNING ON and the software will run again

I hope this will help, sorry for wrong english