Cone Penetration Testing - 5th Edition
Guide to Cone Penetration Testing
for Geotechnical Engineering
By
P. K. Robertson and
K.L. Cabal (Robertson)
Gregg Drilling & Testing, Inc.
5th Edition November 2012
Introduction
The purpose of this guide is to provide a concise resource for the application of the CPT to geotechnical engineering practice. This guide is a supplement and update to the book ‘CPT in Geotechnical Practice’ by Lunne, Robertson and Powell (1997). This guide is applicable primarily to data obtained using a standard electronic cone with a 60-degree apex angle and either a diameter of 35.7 mm or 43.7 mm (10 or 15 cm
2
cross-sectional area).
Download
http://s18.alxa.net/s18/srvs2/01/Con...th.Edition.rar