StructurePoint spMats v8.12
Engineers worldwide use spMats (formerly pcaMats, MATS) to optimize
complicated foundations design, reinforcing and soil-structure interaction
spMats, formerly pcaMats/MATS, is a program for analysis and design of
concrete foundation mats, combined footings, and slabs on grade. The slab
is modeled as an assemblage of rectangular finite elements. The boundary
conditions may be the underlying soil, nodal springs, piles, or
translational and rotational nodal restraints.
The model is analyzed
under uniform (surface) and concentrated loads. The resulting
deflections, soil pressure (or spring reactions), and bending moments are
output. The program computes the required area of reinforcing steel in
the slab in accordance with ACI 318-14/11/08/05/02 and CSA
A23.3-14/04/94. The program also performs punching shear calculations
around columns and piles
spMats uses the plate-bending theory and the Finite Element Method (FEM)
to model the behavior of the mat or slab. The soil supporting the slab is
assumed to behave as a set of one-way compression-only springs (Winkler
foundation) HOW TO INSTALL/RUN THIS RELEASE
1 - Unpack the release into a directory of your choice
2 - Run the installer and install it
3 - Copy the files from /crack into the installation directory
4 - Enjoy another AMPED releaseed trial, but buy it if you will use it
5 - As always, make sure to have a firewall to block outbound connections
136MB
Download
http://s19.alxa.net/s8/srvs1/001/004/...Mats.v8.12.rar
Engineers worldwide use spMats (formerly pcaMats, MATS) to optimize
complicated foundations design, reinforcing and soil-structure interaction
spMats, formerly pcaMats/MATS, is a program for analysis and design of
concrete foundation mats, combined footings, and slabs on grade. The slab
is modeled as an assemblage of rectangular finite elements. The boundary
conditions may be the underlying soil, nodal springs, piles, or
translational and rotational nodal restraints.
The model is analyzed
under uniform (surface) and concentrated loads. The resulting
deflections, soil pressure (or spring reactions), and bending moments are
output. The program computes the required area of reinforcing steel in
the slab in accordance with ACI 318-14/11/08/05/02 and CSA
A23.3-14/04/94. The program also performs punching shear calculations
around columns and piles
spMats uses the plate-bending theory and the Finite Element Method (FEM)
to model the behavior of the mat or slab. The soil supporting the slab is
assumed to behave as a set of one-way compression-only springs (Winkler
foundation) HOW TO INSTALL/RUN THIS RELEASE
1 - Unpack the release into a directory of your choice
2 - Run the installer and install it
3 - Copy the files from /crack into the installation directory
4 - Enjoy another AMPED releaseed trial, but buy it if you will use it
5 - As always, make sure to have a firewall to block outbound connections
136MB
Download
http://s19.alxa.net/s8/srvs1/001/004/...Mats.v8.12.rar